搅拌车上装示意图

	混凝土搅拌输送车上装制造技术 1：传动系统意大利PMP/德国ZF 2：副车架前后部位采用箱型结构：副车架副梁采用矩形管结构。增加了整车抗扭力强度。 3：进料斗与卸料斗及摆动溜槽均加耐磨衬板。 4：筒体内部搅拌叶片顶端部位装有耐磨护条。 5：叶片高度400mm,局部高450mm,叶片全部采用满焊焊接工艺。 6：出料溜槽可拆卸，升降可调节。 7：搅拌筒轨道采用封闭式的结构有防止污染。 8：水箱容积450～650升。 9：液压马达和减速器传动系统带有扭矩余量，以此提高运转可靠系数。 10：闭式液压回路系统，提高工作效率。 11：搅拌筒重心整体高度较低，行驶通过性和稳定性优越。 12：所有紧固件：附件等经镀锌和镀铬发黑处理。

Concrete mixing equipment transport vehicle manufacturing technology 1: Italy transmission PMP / Germany ZF 2: Vice-frame before and after using the site box structure, the Deputy Vice-beam frame structure using rectangular tubes. An increase of anti-torque strength Vehicle. 3: into the hopper with the discharge chute swinging bucket and are wear-resistant lining increase. 4: cylinder internal mixing blade with wear-resistant parts of retaining the top section. 5: blade height 400mm, local high-450mm, full use of all the leaves of welding technology. 6: a feed chute detachable, adjustable take-off and landing. 7: Mixing drum track the use of closed-end structure to prevent pollution. 8: water tank capacity of 450 ~ 650 liters. 9: hydraulic motor and reducer drive system with torque margin in order to improve the operation of the reliable factor. 10: Closed-circuit hydraulic system and enhance efficiency. 11: mixing tube as a whole a high center of gravity low, running through the superiority and stability. 12: All fasteners, accessories, and so galvanized by the black and chrome handle