奥恒搅拌筒

奥恒搅拌筒结构特种技术
1：筒体内有四块拌叶、具有良好的搅拌性能，使拌出的混凝土更加均匀。
2：拌叶上开有拌孔能提高混凝土搅拌质量。
3：密封管-----呈漏斗形状，口径大能确保顺利进料。
4：螺叶片呈曲面顶端加防护耐磨条，延长叶片使用寿命。
5：叶片上有几个圆孔及长方钜形孔减少混凝土在叶片上的粘附。
6：搅拌筒体（罐）材料选用B520JJ合金钢、抗耐磨材质。
7：封头由整块钢板旋压成型。
8：搅拌筒轨道采用ZG35材质，经铸造成型。
9：搅拌筒壳体各部件由高强度及高耐磨材质制作而成。
10：搅拌筒整体焊接采用自动埋弧焊技术。

Austria Constant mixing tube structure of special techniques
1： the body has drum mixed with four leaves, stirring with a good performance out of the concrete mix to make a more uniform
2： mixed leaves on a mixed open hole to raise the quality of concrete mixing;
3： sealed tube was funnel shape, Large caliber to ensure a smooth feed：
4： Lo leaves were added to the top surface wear protection, to extend the service life of the leaves,
5： leaves on a few large rectangle-shaped hole and the hole in the concrete to reduce the adhesion of the leaves;
6： Mixing cylinder (tank) B520JJ optional alloy steel materials, wear resistant materials;
7： from the first block plate spinning,
8： ZG35 stirring drum track using the material, casting molding.
9： Stir the tube shell parts from high-strength and high wear-resistant materials produced. 10： mixing tube as a whole to adopt automatic submerged arc welding technology.

(搅拌筒结构示意图) (Mixing tube structure diagram)
A密封管----呈漏斗状、圆锥体型结构、有利于进料。
B叶片U呈曲面状、有利于提高低坍落度及混凝土出料性能。
拌叶c和D具有良好的搅拌性能、有利于保持预拌混凝土的质量
搅拌筒壳体E由高强度钢板拼接制成，耐磨性高。

A sealed tube was ---- funnel-shaped, conical structure of the body will help feed.
B leaves were U-shaped surface and will be beneficial to low slump and concrete material properties.
C leaves mixed with D and has a good stirring performance, is conducive to maintaining the quality of ready-mixed concrete
E stirring drum shell by stitching made of high strength steel, high wear resistance.

搅拌筒系列产品主要技术参数 Mixing drum major series of technical parameters

工作装置技术参数	Public Works For Loading Home Technology Operation Participation Number	搅拌筒几何容积　Mixing geometric cylinder volume	m3	10.7	12.15	14.2	15.62	17.52	19.23	21.5	24.82
		有效容积　Effective volume	m3	6	7	8	9	10	11	12	14
		搅拌容积　Stir volume	m3	6	7	8	9	10	11	12	14
		填料率　Fill rate	%	54.3		55.7	56.8		57.2		58.4
		搅拌筒倾斜角　Mixing cylinder angle of inclination	º	15		13	12		11		15
		坍落度　Slump	cm	50～115
		出料残余率　The expected rate of residual	%	<0.0%～0.32%
		进料速度　Feed speed	r/min	≥3
		出料速度　Expected to speed up	r/min	≥3